61830 150X190X20 DALUO Deep Groove Ball Bearing Open
Single Row Deep Groove Ball Bearings
Core Advantages:
-
Wide Application: Highly versatile and widely used in various mechanical systems.
-
Low Friction: Operates with minimal friction, ensuring high efficiency.
-
High-Speed Performance: Optimized design reduces noise and vibration, allowing for higher rotational speeds.
-
Load Capacity: Capable of supporting both radial and bidirectional axial loads.
-
Easy Installation: Simple to install with minimal alignment requirements.
-
Minimal Maintenance: Requires significantly less maintenance compared to many other bearing types.
Key Features:
-
Simple, universal, and robust design.
-
Low friction.
-
High-speed capability.
-
Radial and bidirectional axial load capacity.
-
Almost maintenance-free.
Modeling System
The bearing model consists of three parts: Prefix, Basic Model, and Suffix.
1. Prefix
|
Prefix
|
Description
|
|
SS
|
Stainless steel material, inch size.
|
|
F
|
Flanged outer ring.
|
|
HOT
|
High-temperature resistant bearing.
|
2. Suffix - External Design (Seals, Locking Grooves, etc.)
|
Suffix
|
Description
|
|
N
|
Outer ring with a locking groove.
|
|
NR
|
Outer ring with a locking groove and a retaining ring.
|
|
N1
|
Outer ring with one positioning groove (recess) on one end face.
|
|
-RS1, -2RS1
|
Single or double-sided contact seals with nitrile rubber (NBR).
|
|
-RS2, -2RS2
|
Single or double-sided contact seals with fluororubber (FKM/Viton).
|
|
-RSF, -2RSF
|
Single or double-sided contact seals with nitrile rubber (NBR).
|
|
-RSH, -2RSH
|
Single or double-sided contact seals with nitrile rubber (NBR).
|
|
-RSH2, -2RSH2
|
Single or double-sided contact seals with fluororubber (FKM/Viton).
|
|
-RSL, -2RSL
|
Single or double-sided low-friction seals with nitrile rubber (NBR).
|
|
-RZ, -2RZ
|
Single or double-sided non-contact seals with nitrile rubber (NBR).
|
|
-Z, -2Z
|
Single or double-sided metal shields (dust covers).
|
|
-ZNBR
|
Single metal shield (dust cover), outer ring with locking groove, retaining ring on the same side as the shield.
|
|
-ZNR
|
Single metal shield (dust cover), outer ring with locking groove, retaining ring on the opposite side of the shield.
|
|
-2ZNR
|
Outer ring with locking groove and retaining ring, double-sided metal shields (dust covers).
|
3. Suffix - Cage Design
|
Suffix
|
Description
|
|
– (Default)
|
Stamped steel cage, ball-guided.
|
|
M
|
Machined brass cage, ball-guided. Different designs and material grades are indicated by a number following M, e.g., M2.
|
|
MA(S)
|
Machined brass cage, outer ring-guided. "S" indicates lubrication grooves on the guiding ring face.
|
|
MB(S)
|
Machined brass cage, inner ring-guided. "S" indicates lubrication grooves on the guiding ring face.
|
|
TN
|
PA66 cage, ball-guided.
|
|
TN9
|
Glass fiber reinforced nylon 66 cage, ball-guided.
|
|
TNH
|
Glass fiber reinforced PEEK cage, ball-guided.
|
4. Suffix - Material & Heat Treatment
|
Suffix
|
Description
|
|
HQ1
|
Balls made of silicon nitride (hybrid ceramic bearing).
|
|
HQ2
|
Balls made of zirconia (hybrid ceramic bearing).
|
5. Suffix - Precision, Cleanliness, Preload, Quiet Operation
|
Suffix
|
Description
|
|
P5
|
Dimension and geometric tolerances (runout and directional tolerances) meet P5 grade.
|
|
P6
|
Dimension tolerances and geometric tolerances (runout tolerances) meet P6 grade.
|
|
P52
|
P5 + C2.
|
|
P62
|
P6 + C2.
|
|
P63
|
P6 + C3.
|
|
CN
|
Normal radial clearance group. Used only in combination with other letters to indicate narrowed or crossed clearance ranges.
|
|
H
|
Narrowed clearance range, corresponding to the upper half of the actual clearance range.
|
|
L
|
Narrowed clearance range, corresponding to the lower half of the actual clearance range.
|
|
P
|
Crossed clearance range, corresponding to the upper half of the actual clearance range plus the lower half of the next larger clearance range.
|
|
C1
|
Radial clearance less than C2.
|
|
C2
|
Radial clearance less than the normal group clearance.
|
|
C3
|
Radial clearance greater than the normal group clearance.
|
|
C4
|
Radial clearance greater than C3.
|
|
C5
|
Radial clearance greater than C4.
|
|
CA
|
Matched bearing set with small axial clearance.
|
|
GA
|
Matched bearing set with light preload.
|
6. Suffix - Bearing Group, Matched Bearings
|
Suffix
|
Description
|
|
DB
|
Two bearings mounted back-to-back.
|
|
DF
|
Two bearings mounted face-to-face.
|
|
DT
|
Two bearings mounted in tandem.
|
7. Suffix - Size Thermal Stability
|
Suffix
|
Description
|
|
-150
|
Bearing rings maintain dimensional stability at operating temperatures up to ≤ 150 °C (300 °F).
|
|
-200
|
Bearing rings maintain dimensional stability at operating temperatures up to ≤ 200 °C (390 °F).
|
8. Suffix - Lubrication
|
Suffix
|
Description
|
|
MT33
|
Grease suffix.
|
|
MT47
|
Grease suffix.
|
|
WT64
|
Grease suffix.
|
The digit following the grease suffix indicates the amount of grease relative to the free space in the bearing:
-
0: 5 to 10%
-
1: 10 to 15%
-
2: 15 to 20%
-
3: 20 to 30%
-
4: 30 to 40%
-
6: 35 to 45%
-
7: 45 to 60%
-
8: 60 to 80%
-
9: 70 to 100%
